3.
Disconnect the back up lamp switch connector (A).
Remove the air cleaner assembly and air duct.
(Refer to "Intake and Exhaust system" in EM group)
Remove the battery and battery tray.
(Refer to "Charging system" in EE group)
Disconnect the back up lamp switch connector (A).
Check the continuity between no. 1 and 2 terminals of backup lamp switch. When the shift lever is in reverse, there should be continuity.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
Remove the battery and battery tray.
(Refer to "Charging system" in EE group)
Remove the air cleaner assembly and air duct.
(Refer to "Intake and Exhaust system" in EM group)
Disconnect the back up lamp switch connector (A).
Remove the back up lamp switch (A).
Replace a new one and install the back up lamp switch.
Tightening torque:
39.2 ~ 58.9 N.m (4.0 ~ 6.0 kgf.m, 28.9 ~ 43.4 lb-ft)
