4.
Disconnect the back up lamp switch connector (A).
Turn ignition switch OFF and disconnect the negative (-) battery cable.
Remove the battery and battery tray.
(Refer to "Charging system" in EE group)
Remove the air cleaner assembly and air duct.
(Refer to "Intake and Exhaust system" in EM group)
Disconnect the back up lamp switch connector (A).
Remove the back up lamp switch (A).
Replace a new one and install the back up lamp switch.
Tightening torque:
39.2 ~ 58.9 N.m (4.0 ~ 6.0 kgf.m, 28.9 ~ 43.4 lb-ft)
