3.
Remove the select cable snap pin (A) and then remove the select cable (B) from the shift lever pin.
Remove the following items;
Engine cover.
Air cleaner assembly and air duct.
(Refer to "Intake and Exhaust system" in EM group)
Battery and battery tray.
(Refer to "Charging system" in EE group)
Remove the floor Interior console assembly.
(Refer to "Interior(Console)" in BD group)
Remove the select cable snap pin (A) and then remove the select cable (B) from the shift lever pin.
Remove the clip (A) and then remove the shift cable (B) from the shift lever assembly.
Remove the clip (A) from the shift lever assembly.
Remove the retainer (A) after removing a nuts (B).
Tightening torque:
8.8 ~13.7 N.m (0.9 ~ 1.4 kgf.m, 6.5 ~10.1 lb-ft)
Remove the SRS Control Module.
(Refer to "SRSCM" in RT group)
Remove the shift & select cable (A).
Remove the pin (B) and washer (C).
Make unlock clip (D) and then remove the shift & select cable (A) and the clip (D) from the bracket.
When intalling, do not reuse the clip (D).
Remove the shift cable at cabin room.
