2.
Remove the drive belt (B) after turning the drive belt tensioner (A) counterclockwise.
[MDPS]
[HPS]
Loosen the drain plug, and then drain the engine coolant. Remove the radiator cap to help drain the coolant faster.
Remove the drive belt (B) after turning the drive belt tensioner (A) counterclockwise.
Remove the water pump pulley (A).
Tightening torque :
7.8 ~ 9.8N.m (0.8 ~ 1.0kgf.m, 5.8~ 7.2lb-ft)
Remove the water pump (A) with the gasket.
Tightening torque :
9.8 ~ 11.8N.m (1.0 ~ 1.2kgf.m, 7.2 ~ 8.7lb-ft)
Remove the exhaust manifold heat protector (A).
Tightening torque :
7.8 ~ 11.8N.m (0.8 ~ 1.2kgf.m, 5.8 ~ 8.7lb-ft)
Remove the water pump cover (B) with the gasket and the water inlet pipe (A).
Tightening torque :
Bolt (A) : 9.8 ~ 11.8N.m (1.0 ~ 1.2kgf.m, 7.2 ~ 8.7lb-ft)
Bolts (B) : 18.6 ~ 23.5N.m (1.9 ~ 2.4kgf.m, 13.7 ~ 17.4lb-ft)
Installation is reverse order of removal with a new water pump gasket.
Fill the engine coolant.
Start the engine and check for leaks.
Recheck the coolant level.
