4.
Measure the depth from a clutch lining surface to a rivet. If the measured value is less than the specification below, replace it.
Clutch disc rivet depth (A) : 0.3 mm (0.0118 in.)
Inspect cover diaphragm spring wear which is in contact with clutch releas cylinder or consentric slave cylinder bearing.
Check the clutch cover and disc surface for wear or cracks.
Check the clutch disc lining for slipping or oil marks.
Measure the depth from a clutch lining surface to a rivet. If the measured value is less than the specification below, replace it.
Clutch disc rivet depth (A) : 0.3 mm (0.0118 in.)
