2.
Disconnect the clutch tube (B) and reservoir hose (A) from the clutch master cylinder.
[Gasoline]
[Diesel]
Do not spill brake fluid on the vehicle; it may damage the paint if brake fluid does contact the paint, wash it off immediately with water.
Remove the following items;
Engine cover
Air cleaner assembly and air duct
(Refer to "Engine And Transaxle Assembly" in EM group.)
Battery and battery tray
(Refer to "Charging system" in EE group.)
In case of diesel, remove the fuel filter.
(Refer to "Fuel Delivery System" in FL group.)
Disconnect the clutch tube (B) and reservoir hose (A) from the clutch master cylinder.
[Gasoline]
[Diesel]
Disconnect the ignition lock switch connector (B) and clutch switch (A).
Remove the clutch pedal assembly mounting nut (C-3ea) and pin (D).
Tightening torque:
16.7 ~ 25.5 N.m (1.7 ~ 2.6 kgf.m, 12.3 ~ 18.8 lb-ft)
Remove the clutch pedal and the master cylinder assembly together.
