3.
Remove the washer hose and disconnect the washer motor connector (A) and level sensor connector (B).
When servicing the washer pump, be careful not to damage the washer pump seal.
Do not operate the washer pump before filling the washer reservoir.
Failure to do so could result in premature pump failure.
Disconnect the negative (-) battery terminal.
Remove the front bumper.
(Refer to the BD group - "Front bumper")
Remove the washer hose and disconnect the washer motor connector (A) and level sensor connector (B).
Remove the washer motor (A).
Washer fluid may flow out of the opening of reservior.
Remove the washer reservoir after removing 2 bolts (A).
