2.
Use a SST (09581-2T100) when installing the brake caliper assembly.
caution
-
Do not hit piston end by hammer or prying directly against piston face with screwdriver to push in piston.
-
How to use the SST (09581-2T100)
1.
Connect an air hose(B) to the SST after confirming that the valve of the SST is surely closed.
2.
Input the SST in the caliper and press the caliper piston while opening the valve of the SST slowly couter clock wise.
3.
Close the valve (A) of the SST and disconnect the air hose (B); then, open the valve again to get the rest of air out and remove the SST from the caliper.
