3.
Remove the shower duct (A). [LHD only]
Turn ignition switch OFF and disconnect the negative (-) battery cable.
Remove the crash pad lower panel and reinforcing panel. (Refer to the Body group- crash pad).
Remove the shower duct (A). [LHD only]
Pull down steering column shaft after removing bolts and nuts. (Refer to the steering group - Steering columm & shaft)
Disconnect the stop lamp switch connector (A).
Remove the brake pedal member mounting nut (B).
Tightening torque:
9.8 ~ 14.7 N.m (1.0 ~ 1.5 kgf.m, 7.2 ~ 10.8 lb-ft)
Remove the snap pin (A) and clevis pin (B).
Remove the brake pedal member assembly mounting nuts (A) and then remove the brake pedal assembly.
Tightening torque:
12.7 ~ 15.6 N.m (1.3 ~ 1.6 kgf.m, 9.4 ~ 11.6 lb-ft)
Push the brake booster and then remove the hook after raising the brake pedal when removing the brake pedal assembly.
