3.
Disconnect the ignition coil connectors (A).
Disconnect the battery nagative terminal.
Remove the engine cover.
Disconnect the ignition coil connectors (A).
Remove the ignition coil (A).
When removing the ignition coil connector, pull the lock pin (A) and push the clip (B).
Install in the reverse order of removal.
Center cover installation bolts:
4.9 ~ 7.8 N.m (0.5 ~ 0.8 kgf.m, 3.6 ~ 5.8 Ib-ft)
Ignition coil installation bolts:
9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 Ib-ft)
Measure the primary coil resistance between terminals (+) and (-).
Standard value: 0.75Ω ± 15%
