Turn the ignition switch OFF, and then remove battery (-) cable.

Release the residual pressure in fuel line. (Refer to Fuel Delivery System - “Release Residual Pressurein Fuel Line”)

Disconnect the fuel tube quick-connector (A).

Disconnect the vapor hose (A) which is connected from the PCSV.

Disconnect the fuel pump connector (A) and fuel feed quick-connector (B) from the fuel pump.

Lift the vehicle.

Remove the Canister.(Refer to Emisson Control System - "Canister"

Remove the uncover (B) after remove the nuts (A).

Remove the installation bolt (A), and then remove the fuel line fixing clip (B).

Open the vapor tube and fuel line fixing clip (A) to using driver.

Remove the installation nut (A), and then remove the fuel line fixing clip (B).

Disconnect the fuel & brake line protect (A) from the fixing clip.

Remove the fuel line (A).

Install in the reverse order of removal.