4.
Disconnect the CVVL motor connector (A).
Turn the ignition switch OFF and disconnect the negative (-) cable.
Remove the air intake hose.
(Refer to Engine Mechanical system - "Engine and transaxle assembly”)
Remove the cylinder head cover.
(Refer to Engine Mechanical system - "Timing chain")
Disconnect the CVVL motor connector (A).
Remove the CVVL motor installation bolt (A).
Remove the CVVL motor (A) after rotating the CVVL assembly gear in the direction of the arrow with the (-) driver.
When rotating the gear with driver, place the cloth on the cylinder block to prevent damage by working. But, the cloth should be careful not to go into the engine.
