1.
Disconnect the front oxygen sensor connector (A) and then remove it from the bracket.
Disconnect the front oxygen sensor connector (A) and then remove it from the bracket.
Remove the front muffler (A).
Tightening torque :
39.2 ~ 58.8N.m (4.0 ~ 6.0kgf.m, 28.9 ~ 43.4lb-ft)
Disconnect the rear oxygen sensor connector (A) and then remove the catalytic converter (B).
Tightening torque :
39.2 ~ 58.8N.m (4.0 ~ 6.0kgf.m, 28.9 ~ 43.4lb-ft)
Remove the center muffler (A).
Tightening torque :
39.2 ~ 58.8N.m (4.0 ~ 6.0kgf.m, 28.9 ~ 43.4lb-ft)
Remove the main muffler (A).
Installation is the reverse order of removal.
When installing, replace with new gaskets.
