If wastegate sensor voltage at closed position is out of range, the PCM sets DTC P2562.
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
Plausibility check | 1. Poor connector connection 2. EWGA circuit 3. Defected EWGA |
Enable Conditions |
•
Battery voltage is at between 10V and 16V
•
Adaptation of electric wastegate condition is met | |
Threshold Value |
•
The wastegate sensor voltage at closed position adaptation is higher than 4.8v or lower than 3v. | |
Diagnostic Time |
•
1 sec. | |
MIL ON Condition |
•
2 Driving Cycle |
