Difference in target value and current value of electric wastegate actuator is detected, the PCM sets DTC P2563.
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
Plausibility check | 1. Poor connector connection 2. EWGA circuit 3. Defected EWGA |
Enable Conditions |
•
Battery voltage is at between 10V and 16V
•
Engine coolant temperature is higher than 50℃(122℉)
•
Atmosphere temperature is higher than -10℃(14℉)
•
Engine "ON" | |
Threshold Value |
•
The wastegate sensor voltage at closed position adaptation is higher than 4.8v or lower than 3v. | |
Diagnostic Time |
•
5 sec. | |
MIL ON Condition |
•
2 Driving Cycle |
