▶ Substitute with known-good ECM/PCM and then check for proper operation. If problem is corrected, replace ECM/PCM and then go to "Verification of Vehicle Repair" procedure.

▶ If problem still occurs after ECM/PCM is replaced, then replace EPB ECU and then go to "Verification of Vehicle Repair" procedure.

▶ Fault might be intermittent and caused either by poor contact in connectors or wiring harness, or it has been repaired and control module memory is not cleared yet. Thoroughly check terminal of battery, all connectors (and connections) for looseness, bending, corrosion, contamination, deterioration, and/or damage.

▶ Repair or replace as necessary and then go to "Verification of Vehicle Repair" procedure.