This code reports an error in LIN line. The purpose is to verify the status of BCM(PAS), Sensor and Wire when error is detected at PAS of Rear Right Sensor.
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
LIN Communication monitoring | 1. Contamination of Sensor Area 2. Worng Rear Right Sensor Rubber Seal 3. LIN Communication Error 4. Poor connector connection 5. LIN Communication Line Open |
Enable Conditions |
•
IG KEY ON | |
Threshold Value |
•
Contamination of Sensor Area
•
Worng Rear Right Sensor Rubber Seal
•
LIN Communication Error
•
Poor connector connection
•
LIN Communication Line Open | |
Diagnostic Time |
•
Immediately | |
DTC Erasing Time |
•
Fault Fixed
•
Clear DTC with GDS |
