If CLU2(ODO, Gear "R" signal, Driver Side Door, Hood, Trunk, Driver Seat Belt, Ignition Signal, etc) CAN Message is not received for 2 sec, EPB ECU sets DTC C1628.
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
CAN Message Monitoring | 1. CAN Communication Circuit Open 2. Poor Connector Connection 3. Defected Cluster |
Threshold Value |
•
Clsuter(ODO, Gear "R" signal, Driver Side Door, Hood, Trunk, Driver Seat Belt, Ignition Signal, etc) message is not received for 2 sec.
•
The fault is not checked for 2 sec after ignition "ON"
•
The fault is not checked if CAN BUS OFF is present | |
Fail Safe |
•
DAR/Dynamic Braking(ESP) inhibted | |
Warning Indicator Lamp Status |
•
Warning Indicator Lamp "ON" | |
Clear Condition |
•
Ignition "OFF" and then "ON" |
