BSD sets this code when BSD switch LED's circuit detects abnormal signal voltage below 3V.
This code is set, and the BSD Switch LED lamp turns off, but BSD system is workint normal state regardless this code.
Item | Detecting Condition | Possible cause |
DTC Strategy |
•
BSD right circuit voltage(VLED) check. | 1. Poor connection 2. BSD switch LED circuit GND short |
Enable Conditions |
•
IG ON. ( BSD Switch ON )
•
Engine running. | |
Threshold Value |
•
Less than 3V. | |
Detecting Time |
•
1 second. |
