DTC Description

The A/C Control Module sets DTC B1249 if the Driver Direction potentiometer(Mode Actuator) signal is at or below 0.1V for 0.3 seconds.

DTC Detecting Condition

Item

Detecting Condition

Possible Cause

DTC Strategy

•

Voltage check

1.

Poor Connection in harness

2.

Open in signal (Feedback signal),Power or Ground circuit

3.

Driver Direction potentiometer(Mode Actuator)

4.

Faulty A/C Control Module

Enable Conditions

•

Ignition "ON"

Threshold value

•

Mode Actuator Sensor signal is at or below 0.1V for 0.3 seconds

Failsafe

•

Actuator positions to VENT on VENT MODE.

•

Actuator positions to DEF on any other MODE.

Яндекс.Метрика