When installing the belt, make sure not to damage the pretensioner.
Remove the following items first :
Front seat assembly
(Refer to the BD group - "Front Seat")
Front door scuff trim & rear door scuff trim
(Refer to the BD group - "Interior Trim")
Remove the seat belt lower anchor cover (A).
After loosening the mounting bolt, then remove the seat belt lower anchor (B).
Tightening torque:
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.8 ~ 39.8 lb-ft)
Remove the center pillar lower trim (A).
After loosening the mounting screws, then remove the center pillar upper trim (A) .
After loosening the mounting bolt, then remove the front seat belt upper anchor (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft)
After disconnecting the pretensioner connector lock pin, remove the SIS connector (A), loosen the mounting bolts, then remove the pretensioner (B).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft)
Installation is the reverse of removal.
Remove the following items first :
Front seat assembly
(Refer to the BD group - "Front Seat")
Front door scuff trim & Rear door scuff tirm
(Refer to the BD group - "Interior Trim")
Front seat belt lower anchor
Center pillar lower trim
(Refer to the BD group - "Interior Trim")
Center pillar upper trim
(Refer to the BD group - "Interior Trim")
Front seat belt upper anchor
After loosening the bolts, then remove the height adjustor (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5kgf.m, 28.9 ~ 39.8 lb-ft)
Installation is the reverse of removal.
Replace any damaged clips.
Make sure the height adjusts properly.
Remove the front seat assembly.
(Refer to the BD group - "Front Seat")
After loosening the mounting bolt, then remove the front seat belt buckle (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft)
Disconnect the connector mounting clip (A).
Installation is the reverse of removal.