4.
Remove the injector form (A).
Turn the ignition switch OFF and disconnect the battery negative (-) cable.
Release the residual pressure in fuel line.
(Refer to Fuel Delivery System - “Release Residual Pressure in Fuel Line”)
When removing the fuel pump fuse, a Diagnostic Trouble Code (DTC) may occur. Delete the code with the GDS after completion of “Release Residual Pressure in Fuel Line” work.
Remove the intake manifold.
(Refer to Engine Mechanical System - “Intake And Exhaust System”)
Remove the injector form (A).
Disconnect the rail pressure sensor connector (A), and then remove the sensor (B) from the delivery pipe.
