2.
Remove the RCV control solenoid valve after disconnect the connector (A), bolt (B) and RCV hose (C).
Turn the ignition switch OFF.
Disconnect the RCV control solenoid valve connector.
Measure resistance between the valve terminals 1 and 2.
Check that the resistance is within the specification.
Specification: Refer to “Specification”
Turn the ignition switch OFF and disconnect the battery negative (-) cable.
Remove the RCV control solenoid valve after disconnect the connector (A), bolt (B) and RCV hose (C).
Do not apply oil when hose assembled.
The hose should be inserted perfectly to nipple.
Installation is the reverse order of removal.
RCV Control Solenoid Valve mounting bolt:
7.8 ~ 8.8 N.m (0.8 ~ 0.9 kgf.m, 5.8 ~ 6.5 lb-ft)
