3.
Disconnect the clutch tube (B) and reservoir hose (A) from the clutch master cylinder.
Do not spill brake fluid on the vehicle; it may damage the paint if brake fluid does contact the paint, wash it off immediately with water.
Remove the following items;
Air cleaner assembly and air duct
(Refer to "Intake and Exhaust system" in EM group)
Battery
(Refer to "Charging system" in EE group)
Remove the brake fluid from the clutch master cylinder reservoir with a syringe.
Disconnect the clutch tube (B) and reservoir hose (A) from the clutch master cylinder.
Disconnect the ignition lock switch connector (B) and clutch switch connector (A).
Remove the clutch pedal assembly mounting nut (C-3ea) and pin (D) .
Tightening torque:
16.7 ~ 25.5 N.m (1.7 ~ 2.6 kgf.m, 12.3 ~ 18.8 lb-ft)
Remove the clutch pedal and the master cylinder assembly together.
Separate the master cylinder from pedal assembly.
