3.
Remove the shower duct (A). [LHD only]
Turn ignition switch OFF and disconnect the negative (-) battery cable.
Remove the crash pad lower panel and reinforcing panel. (Refer to the Body group- crash pad).
Remove the shower duct (A). [LHD only]
Pull down steering column shaft after removing bolts and nuts. (Refer to the steering group - Steering columm & shaft)
Disconnect the brake switch connector (A).
Remove the brake pedal member mounting nut (B).
Remove the snap pin (A) and clevis pin (B).
Remove the brake pedal member assembly mounting nuts (A) and then remove the brake pedal assembly.
Push the brake booster and then remove the hook after raising the brake pedal when removing the brake pedal assembly.
