1.
Disconnect the brake switch connector (B).
If the gap between brake switch and bracket is not 1.0 ~ 2.0mm(0.04~ 0.08in), conform to below.
Disconnect the brake switch connector (B).
Pull the locking plate (A) as indicated by the arrow.
Turn brake switch 45° counterclockwise and remove it.
Fix the brake pedal arm and insert fully the brake switch as hiding contact part.
After inserting, turn the brake switch 45° clockwise, and then assemble locking plate by pushing.
Confirm the gap between brake switch and bracket.
Brake clearance (A):
1.0 ~ 2.0 mm (0.04 ~ 0.08 in.)
Connect the brake switch connector (A).
