Disconnect the negative (-) battery terminal.

Using the screwdriver, remove the side cover (A).

Loosen the mounting screw and then remove the crash pad lower cover (A).

Disconnect the crash pad lower switch connectors (A).

Disconnect the diagnosis connector (B) and crash pad under lamp connector (C).

Disconnect the start/stop button connector (D).

Remove the shower duct (A).

Loosen the mounting bolts and than remove the BCM.

(Refer to BE group - “BCM”)

Disconnect the mode control actuator connector (A).

Loosen the mounting screw and then remove the mode control actuator (B).

Installation is the reverse order of removal.