If the PCM/ECM receives an incorrect number of pulses on the inlet camshaft position sensor, DTC P0341 will set.
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
Signal plausibility check | 1. Poor connection or damaged harness 2. Misadjust crankshaft and camshaft pulley position 3. Faulty CMPS #1 |
Enable Conditions |
•
Engine synchronized | |
Threshold Value |
•
Camshaft edge out of normal range | |
Diagnostic Time |
•
8 sec. | |
MIL On Condition |
•
2 Drive Cycles |
