If Short to ground or open circuit in MAP Sensor signal circuit is detected, PCM sets DTC P0107.
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
Electrical Monitoring | 1. Poor Connector Connection 2. Short to Ground or Open in MAP Sensor Circuit 3. Defected MAP Sensor |
Enable Conditions |
•
Battery voltage higher than 6 V and lower than 16 V
•
No relevant DTC present | |
Threshold Value |
•
MAP sensor voltage less than 0.15 V (1.45psi/0.1bar) | |
Diagnostic Time |
•
Continuous | |
Mil On Condition |
•
2 Driving Cycle |
