PCM sets DTC P0223 if the PCM detects signal voltage higher than the possible range of a properly operating TPS2.
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
Voltage Monitoring | 1. Poor Connector Connection 2. Short to Battery or Open in TPS2 Signal Circuit 3. Open in TPS Ground Circuit 4. Defected TPS2 |
Enable Conditions |
•
Ignition Switch "ON" | |
Threshold Value |
•
TPS2 signal voltage higher than 4.9V | |
Diagnostic Time |
•
Continuous | |
Mil On Condition |
•
1 Driving Cycle |
