The PCM sets DTC P0335 when the number of crankshaft teeth during one revolution is incorrect or crankshaft signal is missing while camshaft signal is detected.
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
Signal Plausibility Monitoring. | 1. Poor Connector Connection 2. Open or Short in CKPS Circuit 3. Damaged to the connecting flange or flywheel 4. Misadjust crankshaft and camshaft pulley position 5. Defected CKPS |
Enable Conditions |
•
Camshaft signal valid. | |
Threshold Value |
•
No long-tooth detected or no crankshaft teeth detected after 3 camshaft edge(inlet or exhaust) transitions. | |
Diagnostic Time |
•
3 Revs. | |
Mil On Condition |
•
2 Driving Cycle. |
