P0202 is set when open in injector #2 driver circuit is detected.
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
Electrical Monitoring | 1. Poor Connector Connection 2. Open in Injector #2 Driver Circuit 3. Defected Injector |
Enable Conditions |
•
Engine speed higher than 32 RPM and lower than 6000 RPM
•
No full load
•
Battery voltage higher than 10V and lower than 16V
•
0.3 sec. after fuel cut off elapsed
•
0.3 msec after first pulse of cylinder individual injection | |
Threshold Value |
•
ECU Power Stage Diagnosis | |
Diagnostic Time |
•
Continuous | |
Mil On Condition |
•
2 Driving Cycle |
