P0626 is set when the PWM signal(Low side) in FR circuit is above 95% during engine stop state or when the PWM signal(Low side) in FR circuit is above 97% during engine running state.
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
Electrical Monitoring | 1. Poor Connector Connection 2. Open or Short to Ground in circuit |
Enable Conditions |
•
0.1 sec. after ignition "ON"
•
Engine Stop
•
No relevant DTC present | |
Threshold Value |
•
Alternator load higher than 35% | |
Diagnostic Time |
•
1 sec. | |
MIL On Condition |
•
- |
