CLU CAN message is not received for over 10 sec, BCM ECU sets DTC C1613.
This DTC is to check CAN signal transmission condition between BCM and CLU. If CLU CAN message is not received for 10 sec. BCM sets DTC.
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
Check CLU CAN communication | 1. CAN Communication Circuit Open 2. Defected CLU |
Enable Conditions |
•
BCM Ignition Switch "ON" | |
Threshold Value |
•
CLU CAN message is not received for 10 sec. | |
Diagnostic Time |
•
10 sec. | |
DTC Erasing Time |
•
Fault fixed and clear with GDS. |
