This code reports an error in LIN line. The purpose is to verify the status of BCM(PAS), Sensor and Wire when error is detected at PAS of Front Left Sensor.
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
LIN Communication monitoring | 1. Contamination of Sensor Area 2. Worng Front Left Sensor Rubber Seal 3. LIN Communication Error 4. Poor connector connection 5. LIN Communication Line Open |
Enable Conditions |
•
IG "ON" | |
Threshold Value |
•
Contamination of Sensor Area
•
Worng Front Left Sensor Rubber Seal
•
LIN Communication Error
•
Poor connector connection
•
LIN Communication Line Open | |
Diagnostic Time |
•
Immediately | |
DTC Erasing Time |
•
Fault Fixed
•
Clear DTC with GDS |
