Component Inspection
1.

IG Key "OFF".

2.

Disconnect BSD switch connector.

3.

Measure resistance between terminals of BSD switch connector.

BSD switch

ON

OFF

Specification

Approx. 200 Ω

∞

4.

Is the measured value normal?

▶ Check BSD switch connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and then go to "Verification of Vehicle Repair" procedure.

▶ Substitute with a known-good BSD switch and check for proper operation.

If the problem is corrected, replace BSD switch and then go to "Verification of Vehicle Repair" procedure.

Яндекс.Метрика