As manual for diagnosis methods by using diagnosis device, the main contents are as follows:
Connect self-diagnosis connector(16pins) located in the lower of driver side crash pad to self-diagnosis device, and then turn the self-diagnosis device after key is ON.
Select the "vehicle model" and "TPMS" on GDS vehicle selection screen, then select OK.
Write ID Read ID and be sure to check are the same.
After registering successfully sensor "Sensor Wireless Information" by the execution determines whether the sensor is working properly.
In North America, the cable is measured separately.
In Domestic/General(European) area, the cable is measured without separation.
Each entry must check whether each sensor normal.
After replacing the tires or sensors, check the status of sensor is working properly after sensor registration process.
