3.
Cut out the adhesive using the cutter (A).
note
●
Please use the cutter with a blade length between 8-12 inches.
Put on gloves to protect your hands.
Be careful not to damage the painted surface.
Remove the following items.
Roof moulding
(Refer to the BD group- "Panoramaroof")
Rear seat
(Refer to the BD group- "Rear Seat")
Rear pillar trim
(Refer to the BD group- "Interior Trim")
Package tray trim
(Refer to the BD group- "Interior Trim")
Rear window glass heater connector
(Refer to BE group - "Rear window defogger")
Spread the WD-40 on the side of rear window glass.
Cut out the adhesive using the cutter (A).
Please use the cutter with a blade length between 8-12 inches.
Enough on the upper (A) and lower (B) side (C) of rear window glass. and then cut out the adhesive using the cutter tool (09861-31100).
Remove the rear window glass (A).
When removing and installing the rear window glass, an assistant is necessary.
