1.
Install the intakeCVVT assembly(A), exhaust CVVT assembly(B) and camshaft(C).
Tightening torque :
53.9 ~ 63.7 N.m (5.5 ~ 6.5 kgf.m, 39.7 ~ 47.0 lb-ft)
note
When installing the CVVT assembly bolt, fix the camshaft by wrench at position D.
Install the intakeCVVT assembly(A), exhaust CVVT assembly(B) and camshaft(C).
Tightening torque :
53.9 ~ 63.7 N.m (5.5 ~ 6.5 kgf.m, 39.7 ~ 47.0 lb-ft)
When installing the CVVT assembly bolt, fix the camshaft by wrench at position D.
Install the camshafts.
Apply a light coat of engine oil on camshaft journals.
Install the exhaust camshaft lower bearing (A).
Install the intake CVVT assembly & camshaft (A).
Install the exhaust CVVT assembly & camshaft (A).
Install the timing chain
Check that the mark(A) of the CVVT sprockets are in straight line on the cylinder head surface as shown in the illustration.
Install the exhaust camshaft upper bearing (A) to the front bearing cap.
Install camshaft bearing caps (A) in their proper locations.
Tightening order
Group A → Group B → Group C.
Tightening torque :
Step 1
M6 : 5.9 N.m (0.6 kgf.m, 4.3 lb-ft)
M8 : 14.7 N.m (1.5 kgf.m, 10.8 lb-ft)
Step 2
M6 : 10.8 ~ 12.7 N.m (1.1 ~ 1.3 kgf.m, 8.0 ~ 9.4 lb-ft)
M8 : 27.5 ~ 31.4 N.m (2.8 ~ 3.2 kgf.m, 20.3 ~ 23.1 lb-ft)
Install the high pressure fuel pump(A).
Tightening torque :
18.6 ~ 23.5 N.m (1.9 ~ 2.4 kgf.m, 13.7 ~ 17.4 lb-ft)
Install the ratchet of the timing chain tensioner by pushing the link up using a thin rod.
Install the service hole bolt of the timing chain cover.
Tightening torque :
11.7 ~ 14.7 N.m (1.2 ~ 1.5 kgf.m, 8.6 ~ 10.8 lb-ft)
The bolt must not be reused once it has been assembled.
Install the cylinder head cover.
(Refer to Cylinder Head Assembly - "Cylinder Head Cover")
