3.
Remove the fuel pump service cover (A).
Release the residual pressure in fuel line (Refer to “Release Residual Pressure in Fuel Line” in this group).
Open the trunk and remove the floor mat.
Remove the fuel pump service cover (A).
Disconnect the fuel pump connector (A).
Disconnect the fuel feed tube quick connector (B).
Remove the plate cover (C) after removing the installation bolt, and then remove the fuel pump from the fuel tank.
Install in the reverse order of removal.
Fuel pump plate cover mounting bolt:
2.0 ~ 2.9 N.m (0.2 ~ 0.3 kgf.m, 1.4 ~ 2.2 lb-ft)
Be careful of fuel pump direction when installing (Refer to the groove in the fuel tank).
