3.
Remove the side repeater lamp assembly by using the a flat-tip screwdriver.
note
Apply the protective tapes on the arrow area and its related parts.
Disconnect the negative (-) battery terminal.
Open the front door.
Remove the side repeater lamp assembly by using the a flat-tip screwdriver.
Apply the protective tapes on the arrow area and its related parts.
Replace the bulb if it is necessary.
Disconnect the negative (-) battery terminal.
Remove the mirror (C) after disconnecting the heater connector (A) and BSD warning connector (B).
Remove the door mirror housing (A) after loosening the mounting screw.
Take care not to damage the mirror holder fixing clip.
Remove the door mirror cover (A) after removing the fixing clip.
Take care not to damage the mirror cover fixing clip.
Loosen the mounting screw (A).
Remove the door mirror turn signal lamp (B) after disconnecting the connector (A).
