2.
Carefully remove the lamp lens (A) from the room lamp with a flat-tip screwdriver.
note
Take care not to damage the part (B)
[A type]
[B type]
Disconnect the negative(-) battery terminal.
Carefully remove the lamp lens (A) from the room lamp with a flat-tip screwdriver.
Take care not to damage the part (B)
[A type]
[B type]
Replace the bulbs (A) and remove the screws if it is necessary.
Remove the room lamp assembly (A) after disconnecting the connector (B).
Disconnect the negative (-) battery terminal.
Remove the vanity lamp (A) by pressing the clip (B) with a small screwdriver.
Remove the vanity lamp assembly after disconnecting the connector.
