Disconnect the negative(-) battery terminal.

Remove the lighting switch of the multi-function switch. (Refer to the multi-function switch)

With the front fog lamp switch, make sure that continuity exists between the terminals below.

If continuity is not as specified, replace the multi-function switch.

Disconnect the negative (-) battery terminal.

Remove the front wheel guard clip(2EA).

(Refer to the BD group - "Front bumper")

Disconnect the front fog lamp connector (A).

Replace the front fog bulb (A) turning it in the counter clock-wise direction.

Install the front fog bulb.

Reconnect the lamp connector.

Install the front bumper.