2.
Loosen the oil filler plug (A).
Park the vehicle on a level ground and stop the engine.
Loosen the oil filler plug (A).
Check level with finger.
Oil level must be up to fill the hole, if not, add oil until it runs over.
Retighten the oil filler plug (A) with a new washer.
Tightening torque:
29.4 ~ 34.3 N.m (3.0 ~ 3.5 kgf.m, 21.7 ~ 25.3 lb-ft)
Park the vehicle on a level ground and stop the engine.
Drain the manual transaxle oil after loosening the drain plug (A).
Install the drain plug with new gasket.
Tightening torque:
58.9 ~ 78.5 N.m (6.0 ~ 8.0 kgf.m, 43.4 ~ 57.9 lb-ft)
Add new oil through the filler plug hole and, fill it just below the plug opening.
Standard oil: SAE 75W/85, API GL-4
Oil capacity: 1.8~1.9L (0.48~0.50 U.S. gal.,1.90~2.01 U.S. qt., 1.58~1.67lmp. qt.)
