3.
While turning the steering wheel to left and right, press the part A(3 places marked red dotted circle) under the steering wheel and then remove the airbag module.
Set the front tires straight-ahead before removing the steering wheel.
If the steering wheel and the front tires are not set straight ahead together, it affects the number of circulation of steering wheel and the cable inside the clock spring is possible to be damaged.
Disconnect the battery negative cable.
After disconnecting the battery negative cable, wait for at least thirty seconds.
While turning the steering wheel to left and right, press the part A(3 places marked red dotted circle) under the steering wheel and then remove the airbag module.
Align the front wheel toward the front.
Remove the wiring fixing clip (C) and disconnect the horn connector (A).
Release the connector locking pin, then disconnect the driver airbag module connector (B).
The removed airbag module should be stored in aclean, dry place with the pad cover facing up.
Remove the steering wheel and steering wheel column shroud. (Refer to the Steering System group- Steering Column and Shaft)
Disconnect the clock spring and horn connector, then remove the clock spring.
