Componet Location
General Description

ITCC(Intelligent Torque Control Coupling) 4WD :

Vehicle uses 2WD(2 wheel drive) for driving at normal speed, but sometimes it uses 4WD (4 wheel drive) accordign to driving condition. (cornering or acceleration)

EMC(Electric Magnetic Clutch) distributes proper torque to front wheel by controling amount of current inside EMC coil.

That time power pressing the multi plate clutch by apply cam is changed by a rate of EMC duty. after multi plate clutch start slip the force for acceletion at front/rear wheel is controlled at a range of 100:0 ~ 50 : 50.

DTC Description

This DTC code is related to the EMC and is set If control harness has an open .

If failure is detected "4WD-ECM" prohibits the "ITCC" control and vehicle is controlled with 2WD by intercepting EMC current.

DTC Detecting Condition

Item

Detecting Condition

Possible cause

DTC Strategy

•

EMC PWM Out of Range

•

Poor Connection

•

EMC circuit open .

•

Faulty 4WD-ECM .

Enable Conditions

•

IG KEY ON

Threshold value

•

When an internal error detected on startup, it was maintained for more than one second.

MIL ON Condition

•

Lamp ON

Diagnostic Circuit Diagram
Яндекс.Метрика