1.
Widen the hook (B), and the remove the head lamp washer nozzle cover (A).
Put on gloves to protect your hands.
When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
Take care not bend or scratch the cover and other parts.
Widen the hook (B), and the remove the head lamp washer nozzle cover (A).
Remove the mounting clips.
Loosen the radiator upper cover mounting bolts.
After loosening the front bumper side’s mounting screw, then disconnect the side’s.
Push the lock pin, disconnect the fog lamp connector (A).
Remove the front bumper.
Installation is the reverse of removal.
Make sure the connector is plugged in properly.
Replace any damage clips.
