2.
Remove the muffler rubber hanger.
Remove the rear wheel & tire.
Tightening torque :
90 ~ 110 N.m(9.0 ~ 11.0 Kgf.m, 65~80 lb-ft)
Remove the muffler rubber hanger.
Loosen the nut then remove the muffler.
Loosen the bolts & nuts then remove the stay.
Remove the rear shock absorber.
Loosen the mounting bolts & nuts then remove the rear cross member.
Tightening torque :
140 ~ 160 N.m(14.0 ~ 16.0 Kgf.m, 101~116 lb-ft)
Remove the rear upper arm.
(Refer to rear upper arm)
Remove the rear assist arm.
(Refer to rear assist arm)
Remove the rear trailing arm.
(Refer to rear trailing arm)
Remove the rear lower arm.
(Refer to rear lower arm)
Installation is the reverse of removal.
