First of all, Inspect the vehicle status. If engine starting is impossible, there are lots of causes.
Inspect that warning lamps on the cluster must be 'ON' , engine cranking is possible (starter is normal) and engine cranking rpm is regular at IG S/W 'START (engine cranking)'.
Make sure a selector lever of the Automatic Transaxle should be ‘P (N)’.
2) IG S/W 'START'
Check a rotation of the starter.
Symptom | Inspection procedure | |
Case1 | ● Engine cranking is possible. | ● Go to "Engine cranking is possible inspection" |
Case2 | ● Engine cranking is impossible. (Warning lamps on the cluster are ‘ON’ but starter does not work.) | ● Check for inhibitor switch signal input to PCM/TCM. ● Repair starting circuit refer to ETM. |
Case3 | ● Cranking velocity is too slow. (Warning lamps on a cluster are faint gradually and starter does not work normally.) | ● Go to "Battery inspection" |
Case4 | ● Cranking sound is abnormal or cranking rpm is irregular. | ● Go to "Cranking rpm is irregular inspection" |
