1.
Warm up the engine sufficiently and monitor the current data.
■ Reference current data
caution
This current data is nothing but an example at certain condition. Thus, the real current data could be different from this example.
Warm up the engine sufficiently and monitor the current data.
■ Reference current data
This current data is nothing but an example at certain condition. Thus, the real current data could be different from this example.
Is the displayed current data normal ?
 | There are possible causes as below. ▶ Click on "Ignition coil circuit" item for more details. ▶ Click on "ETC" item for more details. ▶ Click on "Damper clutch" item for more details. |
 | ▶ Go to "ABS current data inspection" procedure as below. ☞ If vehicle speed sensor current data is abnormal, Inspect ABS system. Because wheel sensor signal input to ABS module and ABS module sends this signal to ECM (PCM). |
Monitor "Vehicle Speed Sensor" current data in the ABS system.
If ABS DTC is displayed while driving on lift, erase DTC by using GDS.
■ Reference current data
This current data is nothing but an example at certain condition. Thus, the real current data could be different from this example.
Is the displayed current data normal ?
| ▶ Repair open/poor connection between ECM harness connector and ABS ECM harness connector. |
| ▶ Repair/replace the wheel speed sensor. ▶ Repair/replace the ABS/VDC ECM. |
